Skip to content
Free Shipping on most orders over $100.00. Buy now, pay later with ShopPay.
Free Shipping on most orders over $100.00. Buy now, pay later with ShopPay.
Wehrli 2011-2022 Ford Power Stroke RCLB/CCSB/SCSB 60in Traction Bar Kit

Wehrli 2011-2022 Ford Power Stroke RCLB/CCSB/SCSB 60in Traction Bar Kit

by Wehrli
Save 3% Save 3%
$1,049.00
$1,049.00 - $1,049.00
$1,049.00
$1,017.53
$1,017.53 - $1,017.53
$1,017.53

Wehrli Model WCF100388

***This kit includes 60" long bars for Crew Cab Short Bed Models***

***This kit is for 2017-2024 Ford F-250 and F-350 Super Duty Trucks with 4 inch Axle Tube Diameter; Sterling 10.5” and Dana M275”***

Built in house at WCFab carrying a LIFETIME WARRANTY against bending or breaking (to original purchaser). Traction bars are a necessary upgrade when increasing the horsepower on your diesel truck to prevent the axle from twisting which can lead to broken u-joints, driveshafts, and even twisted axle housings. Our traction bar brackets bolt on to the bottom of the axle tube via the axle u-bolts and weld to the frame on the front end. We use a high quality RockJock rebuild-able and grease-able “Johnny Joint” heim connection at the frame to allow for adjustment of torsion on the axle or if you raise/lower the rear of your truck. At the axle connection we use a heavy duty Poly Urethane Bushing for decreased noise and vibration which is common complaint if a solid heim is used on both ends. Grade 8 hardware connects the bars to the mounts on the frame and axle. We complete our traction bar kit with our professional in house powder coat process in your color choice and comes standard with a epoxy Primer base coat before the final color which increases corrosion resistance by more than ten times compared to just your standard powder single coat application.

-LIFETIME WARRANTY against bending or breaking (to original purchaser)
-60" Heavy Duty Bars
-Poly Bushings
-RockJock Johnny Joints
-Frame side weld on mounts
-Axle side bolt on mounts
-Grade 8 Hardware
-Powder Coating with epoxy primer base coat

FITMENT NOTES:

  • 2011-2016 Ford F-250 and F-350 Super Cab and Crew Cab Short Bed Please see use WCF100399
  • 2017 or newer F-350 or F-450 Dually (DRW) trucks equipped with the Dana M300 rear axle (4.5" diameter axle tubes) please see part number WCF100501 and separate bar options WCF100837 or WCF100839. 
  • If you have a Lift Kit and your REAR lift Block is taller than 5" or your total lift height is 6" or greater, use part number WCF100399. If you have a Lift Kit and your U-Bolts face up instead of down like factory, please call for ordering assistance. If your truck is on a big lift, please measure from your axle mounting point to your frame mounting point to ensure the bar length will work properly for your application before placing your order.
  • If you have a Regular Cab Long Bed, Super Cab Long Bed, Super Cab Short Bed, or Crew Cab Long Bed truck use part number WCF100399. 

Powerhouse Diesel