Skip to content
Free Shipping on most orders over $100.00. Buy now, pay later with ShopPay.
Free Shipping on most orders over $100.00. Buy now, pay later with ShopPay.
94.5-03 7.3L CNC Fabrication Driver Side Replacement Hpop Line No Fittings

94.5-03 7.3L CNC Fabrication Driver Side Replacement Hpop Line No Fittings

by Cnc
$80.95 - $80.95
$80.95
$80.95 - $80.95
$80.95
CNC Model 424006

This line is a replacement passenger side line for the 94.5 through 97 for the CNC Fabrication line kit

This line can be used on the passenger side 94.5-97 trucks that have e-fuel for a cleaner install.

Features:

  • 94.5-03 7.3L Driver Side Replacement Hpop Line No Fittings
  • All new Genuine Brennan fittings
  • DuPont Teflon lining just like OEM
  • Burst pressure rating of 16,000psi
  • Working temperature rating of 400 Degrees F
  • Nominal working pressure is 5000psi
  • High quality Viton o-rings
  • Made in the USA in Our Shop

Note: If you are unsure of installing this line yourself, seek out a competent and qualified technician to install the lines.

Installation:

Disconnect the battery grounds before installation to avoid accidentally arc'ing the line on the glow plug relay or the alternator charging lug. Use pictures from the product webpage for routing example. The fittings are marked with numbers to label install location. After installation, be sure there is no other lines/wires that are touching the lines that could potentially rub through and damage either the HPOP line or the other line that may be touching it. Use a small section of wire loom protector or a larger piece or rubber hose to wrap around the contact point. Many will remove or bend the engine eyelet on the driver side as a precaution, but it is not necessary. Sealant is not necessary, but IF you choose to use any, use Loctite 680 or Permatex 64000 retaining compound (green) only on the fittings installed in the HPOP. If you are unsure of installing yourself, seek out a competent and qualified technician to install the lines.

Hose Identification: 98.5-03 Superduty 2 Line-Both Sides Are Same Length. 94.5-97 OBS 2 Line- Passenger Is Longer Of The 2.

Fitting Markings: 1- Front Pump Port 2- Rear Pump Port 3- Driver Head 4- Obs Passenger Head 5- Sd Passenger Head And Crossover

Pump Fittings: 28FT/LBS Head Fittings: 23FT/LBS Hose Ends: 21FT/LBS

Powerhouse Diesel